Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Help with lights not woking  (Read 5748 times)

asder

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Help with lights not woking
« on: October 11, 2009, 02:36:55 PM »
Hello

I got some wall switches (WS467) and (WS4777)
I put these switches in my kitchen 2 of them 1 for the small hallway and the WS4777 for the big hallway 1 in the bathroom and 1 for my front porch light.

The problem is 1 kitchen light works the big hallway and bathroom and front porch light work with no problems.
The second kithchen and small hallway light does not work via AHP or remote but do work manually. I have determined that these to lights are on the same circuit as my office. I have been able to unplug my computers to get them to work also I plugged in the CM15A into a plug in the office and the two light would work even with the computers plugged in but the other lights would not work. I have also tried to unplug the power strips and just plug in one computer and it still does not work what could I do to help solve this problem

Thanks

Alan
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Help with lights not woking
« Reply #1 on: October 11, 2009, 04:21:35 PM »
Search forum for "noise" and "phase coupling". You could put filters on the computer, or spring for a repeater.
Logged
"This aftershave makes me look fat"

asder

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Help with lights not woking
« Reply #2 on: October 11, 2009, 04:47:38 PM »
Ok so that does indicate a noise problem then. I didnt relize that a computer could do that im still learning i guess also what does a repeater do and is it something i should get even if the filters fix the problem.

I ordered some XPPF Plug In Filters hopefully that will help.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Help with lights not woking
« Reply #3 on: October 11, 2009, 05:08:41 PM »
Well filters will take care of noise, but there are so many sources of noise now days. CFL bulbs, switching power supplies which are now everywhere as they become cheaper than transformer supplies to produce. Each noise source requires a filter. My solution which has worked for me in four different homes, is to invest in a blowtorch repeater (not the X10/Leviton units).

A 10 volt X10 signal pretty much blasts through most noise. Where the repeater signal can't over come the noise, then go to a filter on that source.
Your mileage may vary, but there are numorus "happy endings" recorded on this forum, after the installation of a repeater.
Logged
"This aftershave makes me look fat"

asder

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Help with lights not woking
« Reply #4 on: October 11, 2009, 06:15:42 PM »
do you have any links for the blowtorch repeater
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: Help with lights not woking
« Reply #5 on: October 11, 2009, 06:24:37 PM »
I have an XTB-IIR and it works very well.

http://jvde.us//xtb/XTB-IIR_description.htm
http://jvde.us/xtb/xtb_ordering.htm

X10Pro and Leviton also make X10 Signal repeaters.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Help with lights not woking
« Reply #6 on: October 11, 2009, 07:51:29 PM »
Quote from: asder on October 11, 2009, 06:15:42 PM
do you have any links for the blowtorch repeater
Brians links are the ones I would have given. I also like ACT 234 which has higher output than the X10/Leviton units. But the XTBIIR has even higher output. I believe Brian has both ACT 134 and XTBIIR and I believe he has said he prefers the XTBIIR. From output strength standpoint there is no difference between ACT 134 and 234.
Logged
"This aftershave makes me look fat"

asder

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Help with lights not woking
« Reply #7 on: October 12, 2009, 05:49:35 PM »
Cool thanks for all the help i will be looking in to getting a XTB-IIR
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.