Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gkelegha]

Hi,

I have an issue with a new CM15pro can anyone help. I cannot get a dusk timer (or any timer) to activate an AM12 lamp module. Installation is as follows:

CM15pro
AHP3.2.4
AM12 Lamp modules x 2
LM12 Lamp modules x 2
Appliance modules
SH624 Remote
SC2800 Alarm Console

I have created some timers, downloaded them to the CM15pro but they will not activate at the specified time. Within AHP the units are showing as on. If I switch the units off and back on manually using AHP they will switch off at the time specified by the timers. What I really want to do is have the units switch on at dusk and off at midnight. I the AM15 on a unique code of A7 this is not in use.

I have tried this with an LM module and the response is the same.

The activity monitor is not showing any activity for the timers either.

I have checked the obvious such as:
Location - mine is Dubin, Ireland.
Dusk resolution is 1.5% - adjusted to .15%
Interface time is correct as per my PC time.

Any help appreciated.

[tjosan]

Hi,

I have an issue with a new CM15pro can anyone help. I cannot get a dusk timer (or any timer) to activate an AM12 lamp module. Installation is as follows:

I'm sure that you are using the Europeen way of using time in your computer and unfortunately it wont work. i.e day/month/ year or something similar.
You have to set your computer the US way i.e month/day/year while you're dealing with CM15 and APH.

I had the same problem and it fixed my problem. BTW, Marmitek's FAQ will tell you the same story.
Good luck

[gkelegha]

Many thanks .......... but I have tried that.

I have sent the unit back after discussing the case with the Marmitek support guys. They are sending me a replacement.