Please login or register.

Login with username, password and session length

Author Topic: Eagle Eye stops working when cold  (Read 2654 times)

wgeorge

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Eagle Eye stops working when cold
« on: January 10, 2010, 08:59:48 PM »

I live in Mass. and would like to put have a motion sensor that turns on my porch light when someone approaches.  I have a system set up with the MS14a EagleEye motion detector which is an indoor/outdoor model.  When the temps get into the 20's it stops working.  Does anyone know how cold they are suppose to work.  Is it just my one unit that malfunctions when cold or do they all quit?

Logged

Bill59

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 54
Re: Eagle Eye stops working when cold
« Reply #1 on: January 11, 2010, 06:36:51 AM »

I live in eastern pa, have five active eye sensors. Three work all the time, one works 75% of the time, and one that gets damp, and will not work most of the time. It was 12 degrees this morning. I don't think there is much difference in the sensors except for dusk,dawn on/off option.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Eagle Eye stops working when cold
« Reply #2 on: January 11, 2010, 09:18:54 AM »

wgeorge have you tried lithium batteries? They are more cold tolerant! ;)
 >!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

wgeorge

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Eagle Eye stops working when cold
« Reply #3 on: January 11, 2010, 09:48:14 AM »

Thanks for the help.  I'll try the lithium batteries.

I tried the lithium batteries and they didn't work.  I'm sending the units back under warranty--I have two that don't work.
« Last Edit: January 14, 2010, 10:17:35 PM by wgeorge »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.