Please login or register.

Login with username, password and session length

Author Topic: sh624 remote won't arm/disarm the system  (Read 4267 times)

peg-leg

  • Sr. Member
  • ****
  • Helpful Post Rating: 11
  • Posts: 111
sh624 remote won't arm/disarm the system
« on: July 05, 2010, 12:38:50 PM »

All of the sudden, both my security remotes stopped working.  The 4 light control buttons still function properly, but the arm home/away functions don't work.  It happened to the first remote a couple nights ago.  The 2nd one this morning.  I have gone through the re-install procedures multiple times with no luck.  Changed to new batteries as well.

I noticed that during the install procedure, once I've registered the remote and  gotten the confirmation beep, when I slide the switch back to run 1 or 2, the record/busy light stays lit for around 10 seconds before going out.  Not sure if this is standard or is being cause by an error.

As of now, I cannot use the sytem in the arm home mode.  My keychain remotes  still work properly

Please help.

Thanks!
Logged

peg-leg

  • Sr. Member
  • ****
  • Helpful Post Rating: 11
  • Posts: 111
Re: sh624 remote won't arm/disarm the system
« Reply #1 on: July 07, 2010, 12:35:54 AM »

Solved this issue by powering down the entire system and re-installing.
Logged

tom j

  • Hero Member
  • *****
  • Helpful Post Rating: 16
  • Posts: 1270
Re: sh624 remote won't arm/disarm the system
« Reply #2 on: July 25, 2010, 04:00:55 AM »

Make sure you keep an eye on it and when you did the reinstall did you generate new security codes for everything, strange things can happen if you don't.

Tom j.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.