How to Disable Sound on Console?

Started by cubby, July 21, 2010, 04:40:00 PM

Previous topic - Next topic

cubby

I would like to disable the sound on the console when the alarm sounds.  This way the burglar cannot easily find the console.  I will use powerhorns for an audible warning.  Any ideas?

dave w

#1
If you are handy with a soldering iron, connect a switch to the alarm sounder wires in the top of the console. You can get small SPST switches at Radio Shark. Probably easiest to just cut one of the wires and solder the switch to the two wires, rather than trying to unsolder one of the wires from the sounder.

http://www.radioshack.com/product/index.jsp?productId=2062509
http://www.radioshack.com/product/index.jsp?productId=2062506

If you are not handy with a soldering iron, get one of the larger switches with screw terminals.

http://www.radioshack.com/product/index.jsp?productId=2062537

Or if you NEVER want the alarm to sound, just cut one of the wires and tape the two ends so they can not short to anything.

Obviously any cutting of wires inside the unit voids the warrenty and totally silences all sounds from the console alarm.
"This aftershave makes me look fat"