Simple Macro not working.

[peg-leg]

I'm using AHP version 3.271

I'm running a test macro that will eventually be used to turn on specific house lights when my wife comes home and opens the garage door.

Here's the macro:

Garage Door DS10A triggered - starts the macro
Turn on stairway light A10
Delay 30 seconds ----------------> I've shortened the time here for testing purposes.
Turn off stairway light A10

Stairway light A10 comes on when the macro is triggered.  But it ends there.  No other steps take place.
I know it's receiving the signal.

This one has me stumped.

[jgenter]

I just worked through a similar problem and learned here that 3.271 is buggy and “downdated” to 3.228 via 3.204.
See my similar thread “Macro Doesn’twork”

[peg-leg]

Thanks JG.  I tried that the other night, still no better.  In this case my condition, "system is arm away" works and the lights come on.  But, there's never a command from AHP after 5 minutes to shut them off. 

Supposedly on Monday, I second level tech support person is supposed to review my issue.  Hopefully he'll give some insight into the problem.

Thanks for your suggestion.