Please login or register.

Login with username, password and session length

Author Topic: Glass Break Detectors  (Read 10008 times)

Hardacrefarm

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Glass Break Detectors
« on: August 17, 2010, 07:12:57 PM »

Anybody know if X10 has glass breakage sensors available?
If so, where at?
Thanks
Logged

Brandt

  • Hero Member
  • *****
  • Helpful Post Rating: 11
  • Posts: 728
  • Sorry miss, I was giving myself an oil-job.
Re: Glass Break Detectors
« Reply #1 on: August 17, 2010, 07:22:51 PM »

you could use the DS10a with glass break tape.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: Glass Break Detectors
« Reply #2 on: August 17, 2010, 07:57:49 PM »

The X10 GB10A Glass Break Detector was discontinued a long time ago.
Logged

jgenter

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 12
Re: Glass Break Detectors
« Reply #3 on: August 17, 2010, 09:25:07 PM »

I used a Visonic Glasstech acoustic glass break detector:

http://www.homesecuritystore.com/p-499-glasstech-visonic-glasstech-acoustic-glassbreak-detector.aspx

in series with a ds10a door switch for our sun room.  I used a 12VDC plug-in power supply to
power the sensor. Either the door switch or the sensor will trigger the DS7000 console on that zone.
Hope this helps!
Jack
 :)
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Glass Break Detectors
« Reply #4 on: August 17, 2010, 10:03:45 PM »

The X10 GB10A Glass Break Detector was discontinued a long time ago.


But the DS10  is still sold by x10 USA.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.