Please login or register.

Login with username, password and session length

Author Topic: Door & Window Sensor Contact Magnet Spacing  (Read 3517 times)

Hardacrefarm

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Door & Window Sensor Contact Magnet Spacing
« on: August 17, 2010, 07:18:03 PM »

Do the two contacts/magnets on the X10 standard door/window sensors actually have to be in contact with each other in order to work properly and reliably?

If not, how far apart is the maximum distance they can be from one another to still perform well?
Logged

Dr.Fiero

  • Full Member
  • ***
  • Helpful Post Rating: 7
  • Posts: 71
Re: Door & Window Sensor Contact Magnet Spacing
« Reply #1 on: August 17, 2010, 08:05:20 PM »

Physical contact isn't needed (nor suggested!).  I'd say keep them within about 10mm or so.

If you've got a meter, just set to ohms, and read across the switch.  Move it in/out, and you'll see the exact trip point (then maybe go 50% of that for safety - false trips suck).
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.