Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Determining What type of module is used  (Read 6188 times)

macrobob

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 46
Determining What type of module is used
« on: October 22, 2010, 11:53:13 AM »
Is it possible, using the SDK to determine what type of module is A1, A2, etc..?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Determining What type of module is used
« Reply #1 on: October 22, 2010, 12:39:39 PM »
No
None of the present X10 modules are two way and have no way to report their status; type or address.
Logged

macrobob

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 46
Re: Determining What type of module is used
« Reply #2 on: October 22, 2010, 12:45:36 PM »
Well, I can use QueryPlc to get the on/off status of modules.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Determining What type of module is used
« Reply #3 on: October 22, 2010, 12:55:39 PM »
Yes it is reporting the last known state. That it was set to by the software.
If you manually change a devices status (On Off Dim Brighten). It will be reported incorrectly by QueryPlc.

The modules do not have any power line transmitters in them and can not tell the world someone changed me with my local paddle.

Insteon and Icon modules with an X10 Address added. Can report changes but have issues with the way dimming is handled between the standard X10 used and what Smarthome chose to use.

You may find the information in this thread interestting. Especially Bill's information.

http://forums.x10.com/index.php?topic=15148.0
« Last Edit: October 22, 2010, 01:34:25 PM by Brian H »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.