Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Solved: Help, Installed VA12A now AHP won't start  (Read 2401 times)

peg-leg

  • Sr. Member
  • ****
  • Helpful Post Rating: 11
  • Posts: 111
Solved: Help, Installed VA12A now AHP won't start
« on: November 12, 2010, 01:15:44 AM »
Edit:  upgraded to 3.296, AHP started working.  Then found out I didn't have high speed USB.  Quick trip the BestBuy solved that.  Camera is working now. The picture is a little dark though.  It's an XX16A.

Thanks everyone for you suggestions.

Just got my first camera. Ninja pan and tilt with xx16a.  I have AHP with Iwatchout plug in installed.  I also have a CM15A.  AHP has worked up to this point.  Multiple macros and modules.  I had to download the VA12A driver from X10.com first because my computer would never recognize the new hardware.  After I did the install, AHP would no longer start.

Using XP on a P4 desktop.
Current ver of AHP is 3.228.

Thanks in advance for your input.
« Last Edit: November 14, 2010, 01:21:36 AM by peg-leg »
Logged

J.B.

  • Hero Member
  • *****
  • Helpful Post Rating: 16
  • Posts: 319
Re: Help, Installed VA12A now AHP won't start
« Reply #1 on: November 12, 2010, 03:23:10 AM »
It's been a while since I have used an older version of the software, but at some point around 3.228 or 3.236 VA12A support was added.
You are running an older version of AHP, I would try installing the latest version, 3.296 from here:

http://www.x10.com/support/support_soft1.htm
Logged

Don N

  • Hero Member
  • *****
  • Helpful Post Rating: 14
  • Posts: 311
Re: Help, Installed VA12A now AHP won't start
« Reply #2 on: November 12, 2010, 08:32:39 PM »
J.B. is correct.  I believe you need to be running AHP version 3.271 or above for the VA12A to work properly. 
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.