New wired camera mic squeal

b25crew · January 26, 2011, 07:13:02 PM

Camera works but, if I plug in the mic cable all I get is a squeal. anybody got any ideas???

dave w · January 26, 2011, 07:23:20 PM

Is it feedback? Mike too close to the speaker?

b25crew · January 27, 2011, 11:18:18 PM

That is what I thought when I tested it - but, now the camera is outside and the same squeal. So its not feedback. Thanks for the reply...

Brian H · January 28, 2011, 06:29:51 AM

What model X10 camera?

How are you processing the video and sound?
Into a monitor or video processor in a computer?

Any added details may assist in finding you an answer.

b25crew · April 11, 2011, 08:01:18 PM

Camera going to a tv/vcr combination - tried in directly to a tv also - same issue just a loud squeal.
it is an SC23A camera.

dave w · April 11, 2011, 08:30:24 PM

Quote from: b25crew on April 11, 2011, 08:01:18 PM
Camera going to a tv/vcr combination - tried in directly to a tv also - same issue just a loud squeal.
it is an SC23A camera.

Put your finger over mike hole on camera, if sound doesn't go way, may be bad camera....yeah, I know, that would be highly unusual.

b25crew · April 12, 2011, 06:06:15 PM

I can hear movement on the mic - but it still squeals - no audible sound - bad mic - bad camera?

dave w · April 13, 2011, 09:55:55 AM

Quote from: b25crew on April 12, 2011, 06:06:15 PM
I can hear movement on the mic - but it still squeals - no audible sound - bad mic - bad camera?

High pitched "squeal", and not a hum or buzz, correct? What do you mean "you can hear movement on the mike" but "no audible sound"?

IMHO a hum or buzz would indicate an open ground on the audio line. Since you describe a "squeal" my guess would be bad camera.
Does the camera give you good video? Have you tried some other audio source to your monitor to verify it is OK? I think the SC23A uses twisted pair in the camera cable so it should be immune to picking up stray signal, but is there any way you can move the cable around while listening to the monitor? Changes in the sound could indicate the squeal is being inductively coupled into the long camera cable. Don't run the camera cable parallel to other cables. If you have to, try and maintain a separation of a foot or more between parallel cables.

b25crew · April 25, 2011, 08:19:49 PM

Camera RMA'd last week - waiting to see when it will come back - .... any idea's how you can find out about an RMA?

News:

New wired camera mic squeal