Topic: Remodeled house, Need new double stick pads for sensors (Read 4190 times)

dax702 · « **on:** December 21, 2010, 01:39:29 AM »

I just had my house repainted so I had to remove all the door and window sensors. How can I get new double sided sticky pads to remount them? I could find nothing in the knowledgebase or elsewhere for such information.. Does X10 send the replacements, can I order them? Please advise quickly so I don't get robbed

Thanks,
Mike

Brandt · « **Reply #1 on:** December 21, 2010, 02:14:41 AM »

Usually when you buy them, they come with a couple extras in the box...but I've found them to separate from the actual magnets after a while anyway, which I've had to fix with superglue...I would suggest just buying a role of double sided sticky padded tape from either a hardware store or office supply store and cutting it to size with an exacto knife

dwp · « **Reply #2 on:** December 21, 2010, 10:16:21 AM »

go to the hardware store and get double sided tape cut it to fit.

Puck · « **Reply #3 on:** December 21, 2010, 03:23:29 PM »

Quote from: dwp on December 21, 2010, 10:16:21 AM

go to the hardware store and get double sided tape cut it to fit.

Hmmm... an 8 hour echo...

Anyways, as Brandt has mentioned, I too originally had issues with the two-way tape drying out and causing false alarms when the sensors fall. For the past 3+ years I have been using adhesive velcro instead of tape and have not had a sensor fail yet. So there are different methods of attachment when & where screws are not practical.

News:

Author Topic: Remodeled house, Need new double stick pads for sensors (Read 4190 times)

dax702

Remodeled house, Need new double stick pads for sensors

Brandt

Re: Remodeled house, Need new double stick pads for sensors

dwp

Re: Remodeled house, Need new double stick pads for sensors

Puck

Re: Remodeled house, Need new double stick pads for sensors