Keypad wireless conbination lock Transmitter

[dwp]

 now if there are no other KORKS, then this shude do-it.  i will post updates.

[dwp]

  still working fine.

[Knightrider]

DWP:

I love this project!  Could you loan me a day or two so I can build it?     All kidding aside,  something like this is in my future, when work slows down.

+1 from me!

[dwp]

nopromblem it's  not that hard .let me now if you have any promb. Dan

[dwp]

at least your working most are not!!!! if i was working i wood not have time for these prodjects.

[dwp]

if you get a RFID controler get it from kawa mall the hong kong controlers kind of suck hard to read the manual and the programming is differante, i ended up with 3 kinds of controlers and the kawa mall controler is better. DO NOT OVER TIGHTEN THE WIRE SCREWS. OR  !!!

[dwp]

Ok it is a good thing that i got the RFID controller with the key Fobs, the delay in armming from the consol is long and the time to dis-arm is short, so the key Fob works great,as soon as you open the door you have to swip the key Fob,if you are fumblling with stuff and ponch the wrong code in, the alarm will go off and the consol is calling every one, so the key Fob is very handie.
now that i have the dis-arm down i have had NO false alarms. and the keypad is working Great.

[dwp]

Here is the new back plate, this plate makes every thing 1 pice,every thing is contained in the back plate, with the weather cover. the weather cover also protects the key-pad.
3/4 wite pine to fit the cover.

[dwp]

1/8 dresser drower material, Glued to back, and sanded.

[dwp]

[dwp]

[dwp]

[dwp]

The Final version.
The Key-Pad is working Great & the external bell's & sirens are working Great.! Hope this helps any-one that wonts a key-pad & external bell's & sirens & or strobes, on there system.