Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Noam]

AHP version 3.305 was released today.
Here are the changes:

Version 3.305 Updated 01/20/2011

    * Fixed possible day/month inversion for custom Holidays in non-US region computers.

You can download the new version here:
http://www.x10.com/support/support_soft1.htm

Here is a link to the revision list:
http://www.x10.com/support/rev_ahp.htm

[Noam]

3.305 didn't fix the problem with SoftStart module dim status not being saved when exiting AHP.
Still waiting for that to be corrected.

[dwgto]

Installs and runs but crashs after I load plugins

[Dan Lawrence]

Installs and runs but crashs after I load plugins

I'm beginning to think the assorted plug-ins are the culprit.   

[dwgto]

I have not tried loading plugins first, I'll try that next. I thought I had read this cured crashs with other version(s)

[delibaker]

I upgraded all my plugins first and then upgraded AHP.  AHP did crash when trying to download timers and macros, but after using windows task manager to kill AHP and X10nets no more crashes.  One thing that did happen with this upgrade and changing the older lamp modules to non-soft start, any macros using LM15a socket rockets had the "on" state change to "off".  Drove me bonkers  till I examined each macro one by one.  So far everything is working OK - fingers crossed!!!

DeliBaker

AHP 3.305 and all plugins except MyGarage/MyGarage Pro & iWatchMobile

[Dan Lawrence]

Guess what.  3.305 is little more than 3.304 with some window dressing.  I tried it and just like 3.204, it failed to properly run timers. NOTHING turned on according to the timers.   SOOOO, back to 3.296 again, that works like AHP should.

[Tuicemen]

I haven't noticed issues with timers as I have a hourly one set to annouce the time.
However I did notice my living room light failed to come on the last 2 nights.
I had thought this was because of my switching back and forth from different version of Windows while debugging a program.
I'll have to watch this one more closely to night!
 

[Dan Lawrence]

I keep virtually every version of AHP on a 250MG Zip Disk and I just moved 3.304 and 3.305 into the Buggy Versions folder along with 3.236 and one other version.

[Noam]

I haven't noticed issues with timers as I have a hourly one set to annouce the time.
However I did notice my living room light failed to come on the last 2 nights.
I had thought this was because of my switching back and forth from different version of Windows while debugging a program.
I'll have to watch this one more closely to night!

Other than one timer on Friday evening that failed to run, everything else has been flawless with my system since I solved by USB issue. Even before that, my CM15A would run the timers (unless the flaky USB connection locked it up), just the PC wouldn't see it. I've been upgrading to each version as they have come out, and haven't noticed any issues with my timers.

[Tuicemen]

NOTHING turned on according to the timers. 

I realize your setup is very basic Dan so when you say NOTHING can you be more specific?
were they light, or appliance modules that failed or Both.

I've notice my lamp module in the living room failed to come on! This was on a  timer!
I'll have to look at it to see if it is set as a soft start or not!
Hummm where is that setting!
 

[Brian H]

There is now a separate tab in AHP for lamp type devices and another one for older non soft start lamp types.
So I would think any module now in the main lamp tab would be soft start.

[Tuicemen]

Thanks Brian,
I don't know why I couldn't see that!
Now to see if that fixed the timmer issue!
The X10 programmers weren't thinking when they set that up!
This means anyone with a old setup has to reprogram their light modules in their AHP setup!
 

[Dan Lawrence]

NOTHING turned on according to the timers. 

I realize your setup is very basic Dan so when you say NOTHING can you be more specific?
were they light, or appliance modules that failed or Both.

I've notice my lamp module in the living room failed to come on! This was on a  timer!
I'll have to look at it to see if it is set as a soft start or not!
Hummm where is that setting!
 

The timers are set for 40 minutes before dusk, when my wife came home at 5:15 not one light in the house was on. Every light in the Living Room, Dining Room, Breakfast Room and 2 lights outside failed to light.

When I backdated to 3.296, all timers worked as setup.

[Brian H]

I wounder if you do the update from a version before the soft start modules where split out. To a newer version that does. The lamp and wall switch definitions get messed up.