Mochad not starting on boot

[Nate23]

I've got mochad installed and running great, however when I reboot the pc I have to unplug and plug back in the CM15A/CM19A.  Any tips on having it start automatically? 

Thanks
Nate

[pconroy]

Are you still having this issue?
I've been off working on other things but can check my Ubuntu 10, mochad install if it might help.

[Nate23]

Yes, still having the issue.  Everything works great, until I reboot. But all I have to do is unplug and plug back in.  I was just letting you know it was with both the cm15a and cm19a.


Thanks

[mmauka]

Yes, still having the issue.  Everything works great, until I reboot. But all I have to do is unplug and plug back in.

/etc/udev/rules.d/91-usb-x10-controllers.rules should run mochad even on boot
whenever the OS detects a suitable X10 controller. udev must be working since
plugging/unplugging works.

However, since it does not work for your system, try running mochad from
/etc/rc.local. If mochad does not find a suitable X10 controller, it bails out
so there is no downside to running it on every boot.

mmauka