Please login or register.

Login with username, password and session length

Author Topic: Motion Sensor now lagging, range reduced  (Read 3170 times)

xboxhaxorz

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 31
Motion Sensor now lagging, range reduced
« on: March 07, 2011, 03:38:26 PM »

I have the ms14 and i had the cm15 in my hallway. The motion sensor would trigger the socket rocket. The light would come on instantly whenever i was in that area.

I had just opened the cm15 and let the antenna hang out, and now IT WORKS from my room which is 15ft away which before it did not work. But now the motion sensor does not work as well, it seems as though the range has been reduced for motion detection but range for cm15 has been increased.

Unit has FRESH batteries
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13260
Re: Motion Sensor now lagging, range reduced
« Reply #1 on: March 07, 2011, 06:15:03 PM »

Try taping the antenna to the outside of the case. So it is pointed up and not hanging down.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Motion Sensor now lagging, range reduced
« Reply #2 on: March 07, 2011, 06:46:37 PM »

But now the motion sensor does not work as well, it seems as though the range has been reduced for motion detection but range for cm15 has been increased.

Motion sensor range can be effected area illumination, ambient temperature, and sensor angle. Any of these things change?
Logged
"This aftershave makes me look fat"

xboxhaxorz

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 31
Re: Motion Sensor now lagging, range reduced
« Reply #3 on: March 09, 2011, 01:10:53 AM »

Yes i did remove it while i was testing. Guess i didnt put it back exactly where it was.

Interesting did not know that about sensors  >!
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Motion Sensor now lagging, range reduced
« Reply #4 on: March 09, 2011, 01:40:55 PM »

Interesting did not know that about sensors  >!
Typically all consumer grade motion sensors are sensitive to infrared spectrum of light. Essentially they look for heat moving across the field of vision. So if ambient temp is close to the temp of the moving body, it is more difficult for the sensor to detect the moving body. Same is true when direct sunlight, or a bright incandescent light, which contains a lot of infrared light shines directly into the sensors field of view.
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.