Chime does not work sometime

Started by vlong, April 27, 2011, 04:00:23 PM

Previous topic - Next topic

vlong

Recently I discovered the "CHIME" does not sound when Open any doors or windows it happened twice to fix it I have to Arm then DisArm the console (AS1200). Any one have this problem??

Brian H

So it is not any perticular Zone? When the chime goes silent. It could be any of the zones being opened?

vlong

Quote from: Brian H on April 27, 2011, 04:04:15 PM
So it is not any perticular Zone? When the chime goes silent. It could be any of the zones being opened?


all doors windows are closed  ??? i did check all Zones all are silent,,,,,, also it does happen again yesterday evenning like i said i have to arm and disarm the console then the console will work normal agin i'm very sure will happen again.

pseeker

I have had this problem with couple of door sensors (but not all in same time).   What I found is that the rf signal reaching these sensor were borderline weak... just enough but not quite.  Most of the time they work, 1 out of 5 times they don't.... when they don't.. they stay off for a while.  Interestingly, I never had problems arming the system with these problem sensors.  I had to rotate or reposition (it was on metal... rebar I would guess) in my house.    I have 10 door/windows sensors deployed and will eventually have a total of 17 seventeen.


vlong

well' even my sensor 5 feet away from console won't do quart i have to arm and then disarm the console to have it work normal.

Brian H

Sounds more like another console problem.

vlong

Quote from: Brian H on April 28, 2011, 06:03:31 PM
Sounds more like another console problem.

Brian,

i have no idea other then that everything working ok just keep on "arm/disarm" to fix it Ooh!! well.

thanks

Brian H

Well. We will make a note of your findings and pass them on to any other user reporting the same problem.