🖥️ActiveHome Pro > OnAlert

OnAlert Macro to send email notification when Alarm is triggered..

(1/3) > >>

X10inGA:
Has anyone figured out how to create a macro send email notification when Alarm is triggered?  Niether AHP Pro nor On-Alert seem to have this option, but there's got to be a way.

phongluu:
Trigger: security sensor (either one by one, or involve UM506/single sensor)
Condition: Arm state
Action: send email (advance)

X10inGA:
I was hoping not to have to set a separate macro for each door and window sensor separately.  AHP Pro/OnAlert should have a built-in "Alarm Triggered" condition for macros, but for some odd reason, they didn't think to do this.

There's got to be some simple and clever way around this.  Any other ideas anyone?  :)

phongluu:
If you read my comment again in (), you will see the easy way out ;)

Get a UM506, set it to same HC/LC as your DS7000/SC12A, connect it to a DS10A, install it to AHP-OnAlert = one single macro.

Tuicemen:
I created a program X10SW that watches the security house code and will send another x10 command on a different house code which AHP could use as a macro trigger
You can find a link to the free X10SW in the thirdparty and add on section!
 >!

Navigation

[0] Message Index

[#] Next page