Please login or register.

Login with username, password and session length

Author Topic: MS10A issues  (Read 4181 times)

ldykler

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
MS10A issues
« on: June 21, 2011, 05:32:07 PM »

Still having trouble with the motion detector MS10A. Was too sensitive, and picked up false alarms as well as the dogs. Covered with wax paper as suggested in some forums, now it doesn't pick anything up, even when i walk in front. Any ideas would be appreciated. Becoming frustrated...
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: MS10A issues
« Reply #1 on: June 21, 2011, 06:00:57 PM »

Wax paper? That's a new one. Seems like it would diffuse too much.

1. Re aim the MS10 to a higher angle to eliminate the dog, and/or
2. Use black tape to create masks on the front lense.
Logged
"This aftershave makes me look fat"

Jeff M

  • Full Member
  • ***
  • Helpful Post Rating: 3
  • Posts: 66
Re: MS10A issues
« Reply #2 on: June 21, 2011, 06:12:31 PM »

I would expect the MS10A to detect a dog.  You may not be able to use the motion detectors if the dog is free in the house with the system armed.  Another thought, is there direct sunlight that comes through a window in the room with the motion detector?  The MS10A may intepret the sun moving during the day, or being blocked by clouds as movement.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: MS10A issues
« Reply #3 on: June 21, 2011, 06:14:16 PM »

http://kbase.x10.com/wiki/Pets_and_Motion_Sensors

If memory serves me. Your MS10As are outside in protected areas?
You do know that they are ignored when the system is Armed Home.
« Last Edit: June 21, 2011, 06:15:51 PM by Brian H »
Logged

tom j

  • Hero Member
  • *****
  • Helpful Post Rating: 16
  • Posts: 1270
Re: MS10A issues
« Reply #4 on: September 23, 2011, 05:50:01 PM »

http://kbase.x10.com/wiki/Pets_and_Motion_Sensors

If memory serves me. Your MS10As are outside in protected areas?
You do know that they are ignored when the system is Armed Home.


Here's another one try the 2 step mode and the tape just put about a 4Th of an inch across the bottom and place it in the 2 step mode.


Tom
Logged

tom j

  • Hero Member
  • *****
  • Helpful Post Rating: 16
  • Posts: 1270
Re: MS10A issues
« Reply #5 on: September 23, 2011, 08:28:34 PM »

Also be sure to orientate it so that it points away from the windows.

Tom j.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.