Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Noam]

AHP version 3.318 was released on 10/3/2011.
Here are the changes:

Version 3.318 Updated 10/3/2011

    AHP: Supports the VA13A.

You can download the new version here:
http://www.x10.com/support/support_soft1.htm

Here is a link to the revision list:
http://www.x10.com/support/rev_ahp.htm


Edited by Tuicemen as links are no longer valid with X10WTI going bankrupt.
Users wishing this should look at: http://forums.x10.com/index.php?topic=28719.msg160778#msg160778
The conversion tool should also work to bring a old registered North American version up to date, though I haven't tested this aspect of the conversion tool.

[Loveheart]

when i install the version 3.318
he say i must register
how must i do that?

[Tuicemen]

you can't use this update it is only for North American Version of AHP

[Loveheart]

oke i understand

 

[ljd10]

Is there any reason why it would be hard to register.
I have purchased active home pro and an appliance module installed the software and manually get it to activate the module.
it will not register. I have turned off xp firewall my dsl firewall set up port forwarding (8080-8888) also  80 open. verified all ports in correct state and working or open. used outside sources to verify. also used the x10 port and ip verification which says it cannot communicate with my computer. However the listening port during the test is set to port 0. with no way to change or randomize port numbers which makes it sort of bogus. also not allowed to rerun test with different settings. does anbody have any constructive "new" ideas?
I am sure the product will based  on the manual control. you don't suppose x10 settings are different?

[Dan Lawrence]

The answer is AHP sold by X10USA is for the US and Canada ONLY!!!!@!   England and the European Countries have different electric current than the US and Canada.

[Noam]

The answer is AHP sold by X10USA is for the US and Canada ONLY!!!!@!   England and the European Countries have different electric current than the US and Canada.

Dan -
I don't see where "ljd10" said they are located OUTSIDE the US or CANADA.
As far as I know, the European version of AHP (distributed by Marmitek, as far as I know), doesn't require registration, so they must be using the US version.

[Tuicemen]

ljd10
Sometimes registration numbers get sent out before they are actualy entered in the server data base.
Usualy you'll get some sort of message like can't find number or such.
Email support and explain the issue and any errors that appear.
Supply your order numbers and as them to double check that they have been entered in the data base!
 

[ljd10]

just have to wait and see. still no luck with registration.  tech support up to level 2 tech does not have any idea whats going on. sales sent me different copies of the sofware still no luck. Its either a communication problem between their computer and mine do to port settings or  settings getting changed during the programming of the last update. I assume everybody updates to most current version- so it can't be that. I have had people assure me that the system works so I don't think i will return it. like I said any ideas i will try.  thankyou.

[branding]

I had control of all my modules from my compter prior to downloading this new AHP version.  Now I can not turn the lights on from the computer, however if I manually turn the light on, I can turn it off using the computer.  The version I was running prior (working) was one from the beginning of the year.  Any ideas? THX

[Noam]

Sounds like a SoftStart issue.
If your lamp modules and wall switches are old enough, they do not support the newer "SoftStart" protocols.
You need to define the module type in AHP.
Edit the module, select "Old Lamps - no SoftStart" from the category, and then re-select the correct module type from the second drop-down.

[r00t4rd3d]

I am in north American. I have AHP version 3.316 installed. When I click Help , Check for update , says I have the latest version. Should I manually update ? Is there any benefits ? I do not have any VA13A's.

[Noam]

I am in north American. I have AHP version 3.316 installed. When I click Help , Check for update , says I have the latest version. Should I manually update ? Is there any benefits ? I do not have any VA13A's.

The "Check for Updates" function has been broken for quite a long time. X10 hasn't gotten around to fixing that one yet.

You can download the latest version of AHP here:
http://www.x10.com/support/support_soft1.htm

[IPS]

Noam

As of now this link http://www.x10.com/support/support_soft1.htm
takes you to 3.316.  and 3.318 is not even listed.

It was working yesterday but not now.

IPS

[Brian H]

3.318 is being listed now.
Maybe there was a server glitch.

Since you have 3.316 installed.
You can use the Updater file listed for 3.318.
The second file listed is the full installation version.