Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Garage door opener lockout and security  (Read 2770 times)

jarleifv

  • Full Member
  • ***
  • Helpful Post Rating: 6
  • Posts: 41
Garage door opener lockout and security
« on: October 06, 2011, 08:14:06 PM »
See the attached photo...

I'm trying to accomplish this:

- Let the garage door opener only receive power when the correct flags are set, and use a Powerflash to open/close the garage door by contact closure
- Open the garage door from the house, without being limited to the garage door remote that came with the opener

I have a UM connected with a magnet sensor on the garage door.

Do you guys see any reason why this wouldn't work?

I need to get a powerflash to test..


Logged

jarleifv

  • Full Member
  • ***
  • Helpful Post Rating: 6
  • Posts: 41
Re: Garage door opener lockout and security
« Reply #1 on: October 06, 2011, 08:15:09 PM »
Flag 7 and 14 are set with a random remote...
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Garage door opener lockout and security
« Reply #2 on: October 06, 2011, 08:29:54 PM »
Are you confusing the operation of Power Flash Modules and Universal Modules?
Logged
"This aftershave makes me look fat"

Noam

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 51
  • Posts: 2818
Re: Garage door opener lockout and security
« Reply #3 on: October 06, 2011, 09:53:52 PM »
Quote from: dave w on October 06, 2011, 08:29:54 PM
Are you confusing the operation of Power Flash Modules and Universal Modules?
To clarify:
A PowerFlash will send a PLC command in response to a signal from the contacts (either low voltage or dry contact).
A Universal Module will open/close a set of dry contacts (can be used to switch low voltage, too) in response to a PLC command.

In other words, the PowerFlash works as a controller, and the Universal Module works like a (for lack of a better term,) module.
Logged

jarleifv

  • Full Member
  • ***
  • Helpful Post Rating: 6
  • Posts: 41
Re: Garage door opener lockout and security
« Reply #4 on: October 08, 2011, 09:56:39 AM »
yeah..i got'em confused..

the powerflash is connected to my magnet sensor, and the UM needs to be controlled by the receptacle..

there..now that's clarified..so switch that stuff around in my picture...

is it gonna work? is it logical?

 B:(
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.