Topic: how do you dim ws4777 from switch itself? (Read 2801 times)

nabril15 · « **on:** January 21, 2012, 10:45:34 PM »

i installed a ws4777 as single pole to control my outside lights, but I dont know how to dim it using the switch itself. I am using incandescent bulbs, and the manual makes no mention of how to dim.

Help
Thanks

dave w · « **Reply #1 on:** January 22, 2012, 10:02:24 AM »

If the switch is newer design (last three years or so) you should be able to dim by holding down the ON-OFF button. If the switch is old, you may not have the local dimming function. This function was added three or four years ago.

Noam · « **Reply #2 on:** January 22, 2012, 11:44:08 AM »

When you turn it on, does it immediately come on at full brightness, or does it "dim up" over the course of a second or two?
If it "dims up," then it is "soft start," and you can press and hold the button to dim it at the switch.
If it comes on instantly at full brightness, then it is older, and doesn't have "soft start." That means it cannot be dimmed locally at the switch.

nabril15 · « **Reply #3 on:** January 22, 2012, 09:43:03 PM »

It must be older because it doesnt do a soft start. I can dim with the remote, but not on the switch.
Damn.

thanks.

News:

Author Topic: how do you dim ws4777 from switch itself? (Read 2801 times)

nabril15

how do you dim ws4777 from switch itself?

dave w

Re: how do you dim ws4777 from switch itself?

Noam

Re: how do you dim ws4777 from switch itself?

nabril15

Re: how do you dim ws4777 from switch itself?