Please login or register.

Login with username, password and session length

Author Topic: what does this mean?  (Read 2915 times)

swooper220

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 12
what does this mean?
« on: March 10, 2012, 06:03:31 PM »

If I have my SC1200 armed and there is a zone flashing, I assume that means that the zone flashing is not functioning properly. I pressed the  test button and the zone stopped flashing. ummmm......WHY ???
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: what does this mean?
« Reply #1 on: March 11, 2012, 07:48:24 PM »

According to the manual, the console may not have received the regular check-in from that remote sensor. Try new batteries.
Logged
"This aftershave makes me look fat"

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: what does this mean?
« Reply #2 on: March 11, 2012, 08:15:45 PM »

Is there any other message on the SC1200s LCD display?
Was it flashing after you tried to Arm it?
As dave w pointed out. The Sensor for that zone didn't check in with in four hours or you tried to arm the console and one of the Zones was Open.
Logged

swooper220

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 12
Re: what does this mean?
« Reply #3 on: March 11, 2012, 08:38:43 PM »

no message about any problems. just read "armed way". in other words, i armed the system before going to bed, woke up and the #10 zone was blinking but system was still armed. i pressed the test button on the #10 door monitor and the flashing stopped and the system stayed armed. not really worried just wondering if this meant anything that i could correct. one zone not working while armed is like a game of russian roulette. gonne try batteries, i guess even new batteries could be bad. thanks everyone for all your help
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.