Topic: Windows 7 w AHP 3.318 VA12A Shows Working in Device MGR - AHP Doesn't See VA12A (Read 5239 times)

9942723 · « **on:** March 06, 2012, 11:47:45 PM »

I have a working x10 system with no problems...until I decided to add video. my system:

Software:
Win7 Ultimate
AHP 3.318
Plugins-
iWatchout
Smart Macros
My House Online
OnAlert
Active PhonePro (not in use yet)

X10 Equipment:
CM11A Interface
V572A with PSC05 Interface (2 way)
IR543AH v2 all Housecode IR Command Centre
UR74A Remote Control
Assorted dimmers
Assorted inwall outlets
Video:
VA12A USB Interface
VR36A Video Receiver
CR12A Scan Cam Remote
XX20A Camera

I can see the camera when I plug into the output of the VR36A on my monitor- Picture is useable
All equipment set to HC "C" and Camera is C2 ( I downloaded a cheat sheet to setup the equipment and have triple checked all settings.
The VA12A shows up in Device MGR with no exclam and shows working properly. I have tried to reload the driver and Windows reports that it up to date.
I get the following error message when I start AHP 3.318 "...AHP is unable to connect to the USB video capture device..."

Any help would be greatly appreciated...

Thanks,

Brad

News:

Author Topic: Windows 7 w AHP 3.318 VA12A Shows Working in Device MGR - AHP Doesn't See VA12A (Read 5239 times)

9942723

Windows 7 w AHP 3.318 VA12A Shows Working in Device MGR - AHP Doesn't See VA12A