Please login or register.

Login with username, password and session length

Author Topic: Macro turn lamp on but sometimes not off after delay.  (Read 1326 times)

Paul H te O

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Macro turn lamp on but sometimes not off after delay.
« on: April 08, 2012, 05:52:20 AM »

Hi All,

I use activehomepro 3.316 with a CM15PRO and X0 modules, I have the following problem:
Sometimes a macro doesn't finisch.
I let a motion sensor avtivate a macro, to turn a lamp on (only when it is off, that's the condition).
The macro does the lamp off after a delay from 2,5 minutes.
Some times the lamp doesn't goes off!!!!
It's not a signal problem because other whise the macro should trigger again by the motion sensor.
But that is not happening because in the CM15PRO the lamp is also stil on.
Is this a bug in the software? or what can I do about this?

This is the macro:
Name: C9 aan LED trap aan
Trigger: C9 On
Condition's: Module Status Off LED trap, Vitrine
(C4) LED trap ON
Delay for 02:30
(C4) LED trap OFF

Thanks for the repley's
Paul.

P.S. The module is a DIN rail applaince module and the macro is stored in the interface.
Housecode C is the monitored house code.
« Last Edit: April 08, 2012, 05:56:51 AM by Paul H te O »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.