Please login or register.

Login with username, password and session length

Author Topic: AHP 3.267 update / registration  (Read 3644 times)

backkri

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
AHP 3.267 update / registration
« on: April 14, 2012, 05:41:37 PM »

Hi all,

Since I was having trouble with my shutters closing 4 hours before dusk while they should only close at dusk, I tried to upgrade my AHP to the latest version to see if this changed anything.  I have following problems:

- when i click the 'check for updates' option, nothing hapens at all.
- I downloaded the 'auto update utility'.  After installing the new AHP correctly, the software asks for the registration codes.  I don't have any codes (nor can I find them anywhere in the 'about' or other sections), when I install from the disk I received the software is registered immediately without having to enter any codes.


Thanks in advance for your replies,

Kristof.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: AHP 3.267 update / registration
« Reply #1 on: April 14, 2012, 05:55:30 PM »

By chance are you using the European version of AHP?
It didn't use a registration number.
The US versions need the number and where not supplied on a CD.
If you have a European version. See if there are any updates for it on the European sites.

Marmitek has AHP 3.316 on their web site.
Software tab of the CM15Pro sales page.
http://www.marmitek.com/en/product-details/home-automation-security/x-10-home-automation/transmitters-and-controllers/cm15pro.php
« Last Edit: April 15, 2012, 08:58:12 AM by Brian H »
Logged

backkri

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: AHP 3.267 update / registration
« Reply #2 on: April 15, 2012, 05:26:07 PM »

Thanks, was not aware of this difference. 

Running the latest version now.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.