Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sotiris]

I'm doing what the manual states for the setup and it simply won't work - the wired works fine but obviously I need them work wirelessly.  Is their a problem with these cameras?

[X10 Repair Depot]

Do a factory reset on the unit and set it up again. This will typically fix the wifi problem. If it does not, then you may have have a bad camera. Please contact customer service for an RMA.

[zue]

I too have a new Airsight PTZ (XX40a) that will not work wirelessly. I have follwed the setup instrcutions 20 times with no results. It seems to configure OK and when I unplug the wired conncetion the camera goes away and nerver comes back with a wireless connection. What is UP?

[Carsonlu]

Try unplug the power and plug again. sometimes, Camera get stuck, need to do it like this.

[owossobob]

Be sure to unplug the Ethernet cable right after telling it to connect wirelessly.  See:
http://kbase.x10.com/wiki/IP_Camera_Wireless_Setup