Please login or register.

Login with username, password and session length

Author Topic: X10 AM466 Appliance Module compatable with sc1200?  (Read 2554 times)

Teachme

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
X10 AM466 Appliance Module compatable with sc1200?
« on: October 06, 2012, 08:34:09 AM »

hey guys i was wondering if a X10 AM466 Appliance Module can be used for lights for the sc1200 unit . would like to have more than what came with my package and i found a few of these at a good price. thanks.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 301
  • Posts: 13094
Re: X10 AM466 Appliance Module compatable with sc1200?
« Reply #1 on: October 06, 2012, 10:24:50 AM »

I tried a pair of later hardware CFL friendly AM466s and my SC1200.
One on the House Code and Light Code set in the options menu and the second one on the House Code and Light Code +1. As the console sends two address commands.

The lights On and Off buttons on the keyfob turn the higher address one On and Off and this is how the SC1200 does things.

They both cycled On and Off when armed and flashed On and Off for an alarm.
Yes they should work fine.

Tried a pair of B&D Freewire FWAR Appliance Modules made by X10 and of the older design hardware. Along with an X10Pro PAM01. They all worked correctly with a SC1200 console.
« Last Edit: October 06, 2012, 10:41:40 AM by Brian H »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.