Please login or register.

Login with username, password and session length

Author Topic: onkyo receiver TX-NR807 OR HTRC180  (Read 16628 times)

geponchuk

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
onkyo receiver TX-NR807 OR HTRC180
« on: June 17, 2012, 06:19:12 PM »

ONKYO code will turn on, but not turn off the receiver.  tried the learning process. power button always a failure. Does anyone know the code or how to program the remote. It is a model IR34A. thanks in advance
Logged

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #1 on: June 17, 2012, 07:54:08 PM »

I have no idea as far as the proper code for your Onkyo gear but some manufacturers use the same code for On & Off - if Off, it turns on and vice versa. It might be worth a try here.
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

geponchuk

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #2 on: June 17, 2012, 11:02:05 PM »

as i said, it will turn on with the codes, but it will not turn off with the same code..  also it will not learn the codes when you hold them next to each other. any other ideas????
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #3 on: June 18, 2012, 05:58:29 AM »

The IR34A in the learing mode. Uses a sensor in the back of the remote.
Are you pointing the sender of the original remote at the rear of the IR34A?

I have also found the exact pointing of some remotes at the back can be touchy.
I have had to raise or lower the original remote or IR34A. To hit the IR34As IR receiver squarely. In some cases.
« Last Edit: June 18, 2012, 06:23:54 AM by Brian H »
Logged

geponchuk

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #4 on: June 18, 2012, 11:46:12 AM »

thank you. I was pointing at the front of the remote.  now it takes the power setting, but will only turn on not off.  I solved the problem by putting in the off code in another place.  Thanks for the help. the instructions do not tell you to put the remote at the back.  now how do you macro on all the devices at once without reprogramming. :)% :)% :)% :)%
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #5 on: June 18, 2012, 01:00:23 PM »

Does the original remote have a separate On and Off button?
Logged

geponchuk

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #6 on: June 18, 2012, 04:46:25 PM »

no. it is just a work around.  can u help in putting in the macros.
1. do u have to input all the power codes manually or by the learning mode.
all the power buttons are in with everything working.  would be nice to have a macro that turns them all on. do we have to manually learn from orginal remote to do macro.  also what key decides the macro
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #7 on: June 18, 2012, 05:55:26 PM »

I have never done any macros on an IR34A so I can't be of any assistance on that.
You may find some added help in the X10 knowledgebase in the Icon remotes area.
http://kbase.x10.com/wiki/IconRemote
Logged

geponchuk

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #8 on: June 18, 2012, 07:18:52 PM »

I am now a pro with everyones help. I can program everything and do the macros. took some time, but everything works.  They need help in writing down the methodology for doing their programing of their remote.  customer service not very good.  It is pretty straight forward
1. try your items
2 if not work go to learn process and place your remote to the BACK OF THE X10 AND FOLLOW INSTRUCTIONS ON THE SCREEN
3 for macros, you have to use sides of one of the devices. pick a number and macro them throught the learning processes.  just make sure you change name to macro and then do the macros to the name.
4. on onkyo you have to do the work around by setting up another device and put the off button on it.  seems to be a different code.

hope this short note helps other beginners.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: onkyo receiver TX-NR807 OR HTRC180
« Reply #9 on: June 18, 2012, 07:29:40 PM »

Thank you for the update and added information.
User feedback and findings is frequently better than the published manuals.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.