Please login or register.

Login with username, password and session length

Author Topic: Video sender plus-does not work from room to room if you have concrete block wal  (Read 123232 times)

carlosmartinez1

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2

I bough the video sender plus with GREAT expectations. Greatly disappointed. It is not able to go transmitt/received a good signal through a single concrete wall between rooms.
Really don't waste the money on this.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295

Have you tried any of the tips in the X10 Knowledgebase?

http://kbase.x10.com/wiki/Video_Sender
Logged

hessville

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 27

I get a good signal in one room in my house (15 foot seperation).
I bought it to send cable/dvr box signal to my screen room that is less than 75 feet from the transmitter and get
nothing but wavy lines with no audio, but I can change the channels.
I called X10 and they told me there is interference (no kidding) some type of electrical device in the path is blocking it
and I need to unplug the device or devices. That means I have to unplug the refrigerator, washer, dryer & A/C - furnace.

Come on X10 you advertised this is your best one yet and has invisawall technology, it's more like invisasignal!
Logged

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org

I bought it to send cable/dvr box signal to my screen room...
By screen room, do you mean a room where you screen videos or a room enclosed by metal screens?
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116

That means I have to unplug the refrigerator, washer, dryer & A/C - furnace.

No it doesn't. I don't know if you have the older 2.4 gHz sender or the newer 900mHz sender. If you know which you have, post it, as it might be helpful when trying to find a solution. Regardless, electronic devices that you need to unplug, just to test and isolate, would be home Wifi network and cordless phones. and like dhouston said, "what do you mean by 'screen room' ?"

Also the paddle antennas on the sender and receiver tend to be very directional, so make sure they are pointing in each others general direction.
Logged
"This aftershave makes me look fat"

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Logged

hessville

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 27

I mean a screen in room that is behind my house.
Logged

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116

I mean a screen in room that is behind my house.
Gad. This is like pulling teeth. Every one completely understands exactly what you are talking about, and will instantly produce accurate solutions to your Video Sender delimma. :'
Logged
"This aftershave makes me look fat"

hessville

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 27

Sorry and thank for the replies but I haven't been on the forum for a while.
I sent the video sender back a while for a full refund!
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.