Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[coolshare]

What module to use to expand the range of SecuriLink?

I tried TM751 and it didn't work at all...

thanks

[dave w]

A little more detail might help, but If you are talking about extending the RF range of the remote sensors back to the console, there is no device, other than improving the antenna or antenna orientation of the console. Lots of postings on the forum about that. Search "SC1200 range".

If you are talking about the range of the powerline commands to an external powerhorn, that is a different matter.

[Brian H]

TM751 does not process Security Sensor RF signals and the SC1200 doesn't have a power line receiver in it to see any power line signals.
dave w mentioned the antenna and sensor mods.

[coolshare]

Is it possible to use two SC1200 in a single house to increase range?

thanks

[dhouston]

Is it possible to use two SC1200 in a single house to increase range?

Try this first. It usually solves range problems.

• http://davehouston.org/X10_feng_shui.htm

[Brian H]

Sensor RF range or power line signals not reaching security modules?

If you are talking about Sensor RF range. I would try the passive reflector in dhouston's link.
If you are talking about the console will not activate some X10 modules when triggered. Then you have a power line signal probelem and we can provide you with troubleshooting links.

Two SC1200s may or may not work.
Depends on if sensors and security remotes are registered to both.
The SC1200 has no power line receivers in it. So if both are triggered or armed together. The power line signals used to flash the lights may step on each other and nothing works.