Please login or register.

Login with username, password and session length

Author Topic: PLW02 3 Way Switch  (Read 1565 times)

Eddie_T

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
PLW02 3 Way Switch
« on: November 19, 2012, 11:16:05 AM »

Can the PLW02 3 way wall switch be used without a companion slave switch as a single point switch?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: PLW02 3 Way Switch
« Reply #1 on: November 19, 2012, 11:24:16 AM »

You should be able to use a PLW02 without the slave.
Connect the Black wire of the Master switch to the 120 volt Line
Connect the Blue wire from the Master switch to the Load.
Tape or cap off the Red wire from the Master switch and it is not used.
Logged

Eddie_T

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Re: PLW02 3 Way Switch
« Reply #2 on: November 19, 2012, 12:15:42 PM »

Thanks much! I had a chance to buy the switch at a much lower price than a WS467 which needs replacing.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.