Please login or register.

Login with username, password and session length

Author Topic: Activehome 1.42 Flashing Lights  (Read 11966 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Activehome 1.42 Flashing Lights
« on: November 26, 2012, 08:30:24 PM »

Does anyone know how to set up lights in activehome 1.42 so that they turn on then off every second?

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Activehome 1.42 Flashing Lights
« Reply #1 on: November 27, 2012, 07:09:06 AM »

If you manage to do this, be aware that an X10 ON or OFF command takes almost one second per command, so your system will be flooded with X10 commands to the point you *may* not be able to send an OFF or "stop" command from a remote. You might want to add a timer to the macro so it will automatically cease after some preset period.
"This aftershave makes me look fat" | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.