Please login or register.

Login with username, password and session length

Author Topic: CM19A internals  (Read 5053 times)

russellc

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
CM19A internals
« on: December 06, 2012, 06:38:03 PM »

Hi, I'm an Australian and would like to be able to receive RF codes from my DS12 units dotted about the house, but it's now almost impossible to find the CM19E 433Mhz version.  Not to mention the ludicrous difference in pricing between the US and here for X10 parts.

I was wondering whether anyone in here has opened up a CM19A and can tell me whether it uses a daughterboard for the RF side of things, or whether the RF bits are heavily integrated with the other parts.

Obviously, if I can change a CM19A to a CM19E by just changing the RF bits (and I already have a couple of receivers), that'll be a win to me.

tia,
RussellC
Logged

russellc

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: CM19A internals
« Reply #1 on: December 06, 2012, 06:59:10 PM »

Well, I just found a site with some internal pictures of a CM19A, and it's not good news for me. 

http://marc.merlins.org/perso/linux/post_2011-07-24_Hacking-an-external-antenna-onto-an-X10-CM19a_-and-adding-misterhouse-support.html

Looks like it's back to the drawingboard of trying to receive the RF with an RF module and my arduino.    >*< 

Pity that the DS12A protocol seems to be a closely guarded secret.

RussellC
Logged

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Re: CM19A internals
« Reply #2 on: December 06, 2012, 07:43:39 PM »

The X10 RF protocol is documented here...
The DS12A only sends two codes which are easy enough to capture.
The security devices also send a code to indicate a low battery but I never investigated that. Charles Sullivan may have documented it and someone here may have a link.

There's some PicBasicPro code here...
which you might be able to adapt for the Arduino.
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: CM19A internals
« Reply #3 on: December 07, 2012, 06:11:30 AM »

If you are trying to use the CM19A and DS12A US and Canadian versions.
They are 310 MHz RF frequency models. As you indicated.

The external and internal photos. Along with the schematic of the CM19A.
Are on the FCC Database web page. In the details tab.
Grantee: B4S
Product Code:CM19A

http://transition.fcc.gov/oet/ea/fccid/

The DS12A.
Grantee: B4S
Product Code: -DS11A  {Yes that is the ID used for both the Radio Shack version and the DS12A X10 Version of the sensor}

« Last Edit: December 07, 2012, 07:23:09 AM by Brian H »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.