appliance module and LED drivers

Started by frankman12, December 13, 2012, 11:05:44 AM

Previous topic - Next topic

frankman12

I'm trying to control some LED drivers that draw about 3 2.5 amps and the appliance modules come back on after about 8 seconds after turning off.

Brian H

Your appliance modules maybe old enough to have Local Control Sensing.
Is there a small white round sticker on the back. With a Date Code on it?

Adding a 4 watt incandescent night light bulb to the output usually calms thing down.
Some have used a 33K Ohm 1 watt resistor on the output. That requires you to know how to do such things with out making a shock or fire hazard.

There is modifications on some web sites to disable the sensing current.
http://www.idobartana.com/hakb/index.htm
They only are for the older before CFL Friendly ones where released.

SMF spam blocked by CleanTalk