Please login or register.

Login with username, password and session length

Author Topic: PF284 or PSC01  (Read 6357 times)

tbaum42

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
PF284 or PSC01
« on: June 21, 2012, 12:05:06 PM »

Hi.  I've been trying to find any place that sells a PSC01 or PF284.  No success.  Any help would be appreciated.
Logged

tbaum42

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: PF284 or PSC01
« Reply #1 on: June 21, 2012, 12:08:58 PM »

Or, are there alternatives to the PSC01 or PF284?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: PF284 or PSC01
« Reply #2 on: June 21, 2012, 12:52:26 PM »

The X10Pro PSC01 and X10 PF284 are discontinued as you probably have found out.

What exactly do you want the modules to send and do you need dry contact or low voltage trigger?

If you just need a dry contact closure to send an X10 On when closed and an X10 Off when opened. The Smarthome I/OLinc may do what you want. I have used a small optocoupler to trigger the I/OLinc from a low voltage source.
http://www.smarthome.com/2450/IOLinc-INSTEON-Low-Voltage-Contact-Closure-Interface-1-In-1-Out-/p.aspx

If you need the On Off cycle to trigger things like a Powerhorn then your best thing to do is keep searching X10 dealers and EBay for a PSC01 PF284.
Logged

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: PF284 or PSC01
« Reply #3 on: June 21, 2012, 01:34:00 PM »

I've been trying to find any place that sells a PSC01 or PF284.  No success.

I have one PSC01 left in my X10 devices inventory:  http://jvde.us/xtb/x10_FS.htm

(Sorry, my mistake.  The powerflash modules are gone, and I only have one PUM01 universal module left.)

Jeff
« Last Edit: June 21, 2012, 03:39:26 PM by JeffVolp »
Logged
X-10 automation since the BSR days

tbaum42

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: PF284 or PSC01
« Reply #4 on: June 21, 2012, 03:11:39 PM »

Thanks Jeff.  I don;t see it so I'll send you an email.  -Alan
Logged

tbaum42

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: PF284 or PSC01
« Reply #5 on: June 21, 2012, 03:19:05 PM »

Hi Brian,

The application is simple... notify me when my physical mail has been delivered. I used to use an eagle-eye wireless to do this, and via ActiveHome i triggered a sound and sent myself a text. But, in this house my mailbox is (way) out of range of the wireless. So, I thought I would just run a wire to the PF284.  I guess the simple answer to your question is I just need a dry contact sensor. I just looked at the Insteon as you said, and it looks right, but can it interface with X10?

Cheers
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: PF284 or PSC01
« Reply #6 on: June 21, 2012, 03:23:30 PM »

You can program a Primary X10 address into it for the sensor and one for the internal relay.
There is a link on the web page for the I/OLinc's Users Manual if you care to look at it.

I see Jeff still has one of the X10Pro PSC01 available.
« Last Edit: June 21, 2012, 04:04:55 PM by Brian H »
Logged

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: PF284 or PSC01
« Reply #7 on: June 21, 2012, 04:01:35 PM »

I see Jeff still has one of the X10Pro PSC01 available.

Sorry, it actually was the PUM01 universal module.  I do have one Powerflash PF284 that I had used for testing, and hopefully that will be OK for him.

Jeff
Logged
X-10 automation since the BSR days

tbaum42

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: PF284 or PSC01
« Reply #8 on: June 21, 2012, 04:18:34 PM »

Thanks to all.   #:)

I'm getting the powerflash from Jeff.  Great forum.

Cheers. (And I will look into the IOLinc for education / futures.)
Logged

jlashnits

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: PF284 or PSC01
« Reply #9 on: January 03, 2013, 05:12:41 PM »

Jeff - If you do still have that PF284 (or a PSC01), I'd be interested in buying it.  OR, do you know of any sources that still have them?

Thx,  John
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: PF284 or PSC01
« Reply #10 on: January 03, 2013, 05:19:51 PM »

There are some on Ebay.
Logged
"This aftershave makes me look fat"

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: PF284 or PSC01
« Reply #11 on: January 03, 2013, 06:57:45 PM »

The status of the Powerflash modules seems quite cloudy.
Some independent dealers are saying discontinued but the Home Automation Store. Indicates they have a factory order for them expected to be delivered in early 2013.  :'
Logged

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: PF284 or PSC01
« Reply #12 on: January 03, 2013, 07:02:45 PM »

Jeff - If you do still have that PF284 (or a PSC01), I'd be interested in buying it. 

Yes, I do have a PowerFlash.  Please contact me privately if you want one.

Jeff
Logged
X-10 automation since the BSR days
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.