Topic: Long wire distance (Read 2206 times)

jorge5a · « **on:** January 10, 2013, 07:40:07 AM »

Hi everybody:

I want send signals between long distanced elements, more than 1Km. It's this possible using X10 technology?

Thanks

dhouston · « **Reply #1 on:** January 10, 2013, 08:59:43 AM »

In theory, yes - ripple control has been around for about a century.

http://en.wikipedia.org/wiki/Load_control

In practice, probably not - there are too many signal attenuators and the output power level of X10 PLC transmitters is too low.

If you are talking about a dedicated cable with no power connection, there are better choices - RS485 for example.

News:

Author Topic: Long wire distance (Read 2206 times)

jorge5a

Long wire distance

dhouston

Re: Long wire distance