Please login or register.

Login with username, password and session length

Author Topic: two airsight wide eye outdoor cameras connection issue  (Read 2437 times)

sfchew

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
two airsight wide eye outdoor cameras connection issue
« on: May 26, 2013, 02:08:18 PM »

Hello, I have two airsight wide eye outdoor cameras connection issue which I set up with fixed ip addresses
192.168.1.110:8000
192.168.1.110:8001
and these addresses are confirmed with ipcamera tool

However, only one of the cameras will stay connected when viewing from the browser.
What do I need to do to keep both cameras to stay connected?
Sometimes the first camera is connected and I am not able to connect to the 2nd camera
or sometimes the 2nd camera is connected but then I get connecting problem with the first camera.


The error I get is
Unable to connect
     
     
     
     
     
       
       
          Firefox can't establish a connection to the server at 192.168.1.110:8000.     

       
       

  The site could be temporarily unavailable or too busy. Try again in a few
    moments.
  If you are unable to load any pages, check your computer's network
    connection.
  If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
Logged

richy2

  • Hero Member
  • *****
  • Helpful Post Rating: 6
  • Posts: 303
Re: two airsight wide eye outdoor cameras connection issue
« Reply #1 on: May 26, 2013, 06:29:52 PM »

Hello, I have two airsight wide eye outdoor cameras connection issue which I set up with fixed ip addresses
192.168.1.110:8000
192.168.1.110:8001
and these addresses are confirmed with ipcamera tool

However, only one of the cameras will stay connected when viewing from the browser.
What do I need to do to keep both cameras to stay connected?
Sometimes the first camera is connected and I am not able to connect to the 2nd camera
or sometimes the 2nd camera is connected but then I get connecting problem with the first camera.


The error I get is
Unable to connect
     
     
     
     
     
       
       
          Firefox can't establish a connection to the server at 192.168.1.110:8000.     

       
       

  The site could be temporarily unavailable or too busy. Try again in a few
    moments.
  If you are unable to load any pages, check your computer's network
    connection.
  If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
I m not techie but you have both cameras on the same IP address even though you have different ports
change one of the static ip address to

192.168.1.110:8000
192.168.1.111:8001

Try It
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.