Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: ActiveEye Motion Sensors controlling multiple lights  (Read 23030 times)

Tony Olson

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 39
ActiveEye Motion Sensors controlling multiple lights
« on: January 08, 2015, 08:04:03 AM »
In the past I had Motion Sensors outside that were tied to one device/light. What I had set up was turning on additional (outside) lights when these were turned on.

I no longer have the macro (s) to do this. If someone could point me to an example I'd be most appreciative.

Thanks in advance.

Tony
Logged
Tony

lviper

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 10
  • Posts: 294
Re: ActiveEye Motion Sensors controlling multiple lights
« Reply #1 on: January 08, 2015, 08:46:06 AM »
THe real simple way is to use your motion sensor as the trigger to turn on the lights you want. For example.

Motion Sensor is A1
Lights are B1, B2 and B3

Using A1 On as the trigger you set the macro to turn on B1, B2 and B3

THen you can create another macro using A1 Off as the trigger to turn off B1, B2 and B3.
Logged

Tony Olson

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 39
Re: ActiveEye Motion Sensors controlling multiple lights
« Reply #2 on: January 08, 2015, 11:03:10 AM »
Thanks Iviper. I'll do just that. #:)
Logged
Tony
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.