📸Cameras & Camera Software > Camera General Discussion

Viewing camera(s) WITHOUT receiver

<< < (2/2)

jb63:
It's silver color, and of course the Lola set includes several parts:

Sender - VT42A
Receiver - VR38A <- This is the one I'm trying to get to work with the XC18A Camera
Remote - UR89A

Brian H:
It may work. The VT42A sender uses the 2.4GHz band as shown in the FCC Database. Receivers are not normally in the database. So I could only find schematics of the sender.

You can try all four of the channels available on the camera and match to the receivers channel setting.

How are you looking at the video. Maybe on a computer with a VA11A, VA12A? Feed from the receivers video output.

jb63:
Thank you Brian. I was able to get it to work, but the picture/sound is very noisy. The way I'm watching the signal is, I have the receiver connected via Red+White+Yellow (audio+composite) to the back of a Samsung flat screen TV. I recall many years ago, when I used the original camera receiver, the picture was better, not HDTV grade, but definitely 'cleaner'.

Brian H:
You may want to look at some of the information in the X10 wiki.
Some other devices share the same 2.4GHz band and can cause interference.
http://kbase.x10.com/wiki/Wireless_Cameras

Navigation

[0] Message Index

[*] Previous page