Please login or register.

Login with username, password and session length

Author Topic: Repair of Vangard camera???  (Read 11164 times)

captainernie

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Repair of Vangard camera???
« on: June 21, 2015, 01:38:26 PM »

HI all,
I just found a Vangard VK-77A I forgot I had. It doesn't work and there is a brown wire coming out it that appears to have been attached to something in the past.
Is anyone aware of a place that repairs these cameras? I'd hate to just junk it.
Thanks
Ernie
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Repair of Vangard camera???
« Reply #1 on: June 21, 2015, 04:30:46 PM »

Would the Brown wire be sticking out of the rear and if you look closely. Has a center wire and some braided shielding around it.
It could be the small diameter antenna wire connected to the antenna on the back of the camera.

I have not seen any repair information for cameras but others may have some sources for you.
Logged

captainernie

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: Repair of Vangard camera???
« Reply #2 on: June 21, 2015, 10:27:14 PM »

Thanks for replying. The wire sort of sticks out through the camera "hinge" or pivot. Very thin, stripped end, no trace of solder.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Repair of Vangard camera???
« Reply #3 on: June 22, 2015, 06:55:21 AM »

After looking at the FCC Database photos of the XC21 camera in the VK77 kit.

The brown wire exiting the camera at the hinge is the wire connected to the transmitter antenna.

If it is exiting the main body the wire has pulled off or was never soldered to the internal antenna in the antenna housing.  If the wire doesn't have solder on it. It may have never been connected inside the antenna or the joint was so poor it didn't solder correctly.

If it is exiting the antenna then it has pulled off the transmitter board inside the main camera body.

Logged

captainernie

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: Repair of Vangard camera???
« Reply #4 on: June 22, 2015, 03:00:34 PM »

AHA! At least I have a starting point now. THanks!!!!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Repair of Vangard camera???
« Reply #5 on: June 23, 2015, 06:10:29 AM »

You are welcome.
If you want to see if you can find the internal and external photos of the XC21A.
They are in the FCC database.
Grantee Code: B4S
Product Code :XC21A
In the details choice.
http://transition.fcc.gov/oet/ea/fccid/

If the wire pulled out of the antenna assembly. There are no FCC internal photos of the antenna. Just the main body boards where the other end of the brown wire. Soldered to the transmitter PCB.
« Last Edit: June 23, 2015, 06:13:31 AM by Brian H »
Logged

captainernie

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: Repair of Vangard camera???
« Reply #6 on: June 24, 2015, 09:59:01 AM »

WOW!! THanks again, that's incredible. I had no idea that was available
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.