Please login or register.

Login with username, password and session length

Author Topic: XC18A  (Read 2357 times)

BSwagger412

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
XC18A
« on: January 21, 2021, 08:16:07 PM »

So i have a CM19A transceiver A MS16A Motion sensor and a XC18A wireless camera im trying to set it up so the motion triggers the camera to turn on but even a live feed would be nice what software are people using and do i need any other hardware from my understanding what i have is all i need any help would be greatly appreciated     
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: XC18A
« Reply #1 on: January 21, 2021, 08:33:36 PM »

Do you have an X10 video receiver to receive its 2.4GHz signal?
Or do you want to try and modify it to get the video signal from it directly?

Do you have the XM13A power supply for it. It is turned On and Off with an X10 power line signal. So you also need a X10 RF Transceiver that can put the Motion Sensors RF commands onto the power line. To control it. The CM19A is a USB model and can not put the X10 command onto the power lines. Maybe a TM751 or RR501 would work.

I just added the camera and receiver kit's manual.

http://kbase.x10.com/wiki/Wireless_Cameras

http://kbase.x10.com/wiki/Video_Receivers
« Last Edit: January 22, 2021, 07:05:23 AM by Brian H »
Logged

petera

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 27
  • Posts: 1750
Re: XC18A
« Reply #2 on: January 21, 2021, 09:43:05 PM »

You don’t by any chance have an X10 security panel in use or one you could use. They also act like transceivers and can get a signal back to the power line. Just a thought if you had one.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.