Please login or register.

Login with username, password and session length

Author Topic: Alarm system module  (Read 2909 times)


  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 59
Alarm system module
« on: April 26, 2017, 12:56:09 AM »

That might be similar, it has a dialer. The 521 does not.
That unit has the very same motion detector that the 521 doesn't seem to recognize.

The 521 recognized and installed all the door sensors and keypads/keyfobs the magnavox thing used.
But I haven't had success with the PIR yet.
It's not walk testing at the moment, so it might be just from age.

I had to scrap out a brand new door sensor, it installed but then a few hours later got flaky.

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13263
Re: Alarm system module
« Reply #1 on: April 26, 2017, 06:12:10 AM »

Where the three manuals I scanned and attached in this thread any help?

From your other threads. Are you trying to use a MS10A Motion Sensor?
Did you initialize it as pointed out in the other threads. Before trying to enroll it?  If not initialized first. It will not be properly added.
« Last Edit: April 26, 2017, 06:22:14 AM by Brian H »
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.