WM100 & TM751

Started by Jim_R, March 12, 2018, 08:35:25 AM

Previous topic - Next topic

Jim_R

When I first setup the WM100 it was able to trigger a lamp plugged directly into my TM751.  I temporarily changed the TM751 to house code A to test a new to me universal module, and since moving it back to house code C, the WM100 will not trigger the lamp module.  Remote controls, X10 Commander, and others all trigger the TM751, and in turn the TM751 passes commands to other devices, but no WM100 to  TM751 joy.   

Knightrider

The WM100 has no RF transmitter, therefor cannot trip a TM751. Any program utilizing the CM15 can tap that device''s RF transmitter.

The TM751 does not respond to PLC signals, -- only RF.

A RR501 will work with both, and acts very much like a TM751.
Remote control is cool,
but automation rules!