Garage Door Opening Modules

[Mic_]

Again, thanks a bunch. I will definitely investigate and latch on, if available and workable

[Mic_]

Dave; it's available, compatible and ordered   

[Brian H]

Here is the link to the Full Users Manual for the 2450 I/O Linc module in the kit.
It has to be downloaded anyway. As only a small Quick Guide is in the box.
https://cache-m2.smarthome.com/manuals/2450.pdf

[dave w]

Dave; it's available, compatible and ordered   

I think you will like it. I have had three X10 PowerFlash modules (the door status monitor) quit working out of the blue, so bought one of the Smarthome modules. Have had no trouble with it, other than it was a little difficult to program for X10. First you have to program your two X10 addresses (if you are using both control and status functions) , and then you have several options on how the closure relay responds and how the status responds to an input.  Being an old geezer, I probably did not follow the directions closely. Took several attempts to get it right. 

[Brian H]

That is why there is a Factory Reset available.
If you miss a step in the Set Button sequences.

Also occasionally modules ship with test Insteon links and sometimes X10 in them.
Most seasoned users automatically do a Factory Reset before doing anything with them.

[Mic_]

Thanks again folks