Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: X 10 Ip, out door camera control issues  (Read 11483 times)

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
X 10 Ip, out door camera control issues
« on: March 17, 2018, 11:14:03 PM »
Anyone familiar with X10, outdoor pan, tilt, Zoom (PTZ) camera manual software control freezing, rapid uncontrolled camera movement occasionally?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10545
  • I don't work for X10, I use it successfuly!
Re: X 10 Ip, out door camera control issues
« Reply #1 on: March 18, 2018, 03:11:29 AM »
Which camera and which software?
It is possible there is a firmware update.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: X 10 Ip, out door camera control issues
« Reply #2 on: March 18, 2018, 03:54:36 AM »
X10 Airsight xx40 with the IP camera tool firmware version 17.35.2.41
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10545
  • I don't work for X10, I use it successfuly!
Re: X 10 Ip, out door camera control issues
« Reply #3 on: March 18, 2018, 05:35:20 AM »
I don't believe had one of those but they are simular to the old Easyn mpeg outdoor cameras.
The EasyN camera PC software I believe is compatible with it.
I also was able to flash a Foscam firmware to a old EasyN out door camera that had failed and got it back up and running
I'll try to see if there is or was a firmware update for the XX40A.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: X 10 Ip, out door camera control issues
« Reply #4 on: March 18, 2018, 06:25:01 AM »
There are some software links in the X10 Wiki. For the XX40.

http://kbase.x10.com/wiki/XX40A
Logged

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: X 10 Ip, out door camera control issues
« Reply #5 on: March 18, 2018, 07:30:35 AM »
So, you guys think the software may be the issue here?

Tell me; the high deff X10 PTZ cams don't need port forwarding? whick ones would you all recommend?
Logged

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: X 10 Ip, out door camera control issues
« Reply #6 on: May 12, 2018, 12:52:21 PM »
where could I locate the  EasyN camera PC software? I really need to replace my existing xx40 software. Thanks
Logged

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: X 10 Ip, out door camera control issues
« Reply #7 on: May 12, 2018, 12:55:00 PM »
One issue puzzles me regarding the family of PTZ cams like the XX40...These require port forwarding set ups, while the newer IP cams don't. any thoughts?
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: X 10 Ip, out door camera control issues
« Reply #8 on: May 12, 2018, 01:25:23 PM »
Quote from: Mic_ on May 12, 2018, 12:55:00 PM
......These require port forwarding set ups, while the newer IP cams don't. any thoughts?

I bought Web Cameras back in '95. They were $100 each and required leasing a server to make them work. Even then... I could only get decent enough Internet speed to use them (I sent one to my now wife) in the very early hours of the morning.

Everything gets better.... and better. It's tough to set-aside the old tech and modernize. But often enough... that's the solution.
Logged
Home Automation is an always changing technology

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: X 10 Ip, out door camera control issues
« Reply #9 on: May 12, 2018, 03:49:37 PM »
I get it. I was trying to gain some knowledge; but, I understand the drift. Thanks
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10545
  • I don't work for X10, I use it successfuly!
Re: X 10 Ip, out door camera control issues
« Reply #10 on: May 12, 2018, 07:57:48 PM »
Quote from: Mic_ on May 12, 2018, 12:55:00 PM
One issue puzzles me regarding the family of PTZ cams like the XX40...These require port forwarding set ups, while the newer IP cams don't. any thoughts?
the newer IP PTZ cameras still need port forwarding if you use the web interface.
If you use the IP camera app port forwarding isn't needed as the software uses P2P
I'll have a look for the EasyN IP camera software but I suspect if the x10 camera software is failing it will to.
Have you tried connecting with the Ethernet cable to be sure it isn't the cameras Wi-Fi that failed?
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: X 10 Ip, out door camera control issues
« Reply #11 on: May 13, 2018, 06:45:20 AM »
Thanks for the knowledge and patience. The failure I mentioned does not happen all the time. Things will work for a while, then fail (Kinda freeze) then the camera will speed through pan, tilt, and zoom mode before parking itself on the bottom of its travel. Once I reset the power, it would work again. I have much better luck with it controlling from my smart phone. Thanks again
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.