Please login or register.

Login with username, password and session length

Author Topic: Harmony P2-adding Scenes for Alexa  (Read 898 times)

Moose

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 219
Harmony P2-adding Scenes for Alexa
« on: August 17, 2020, 03:20:44 PM »

I have been playing with my P2 and have quite a few working devices controlled with Alexa.  I would like to create a Scene so multiple devices go off with one command. It seems that I need to add a "Controller" to get it to work with Alexa. The Scene works fine from the phone app. Suggestions.
Logged

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 157
  • Posts: 1406
Re: Harmony P2-adding Scenes for Alexa
« Reply #1 on: August 17, 2020, 09:01:19 PM »

The Controller in a Scene has to be a device that transmits when activated.  For example, an Insteon or Zigbee wall switch can transmit when pressed and that signal can trigger a Scene in the P2.  X10 switches don't transmit so Scenes can't be triggered that way. You could use an X10 Mini or Maxi Controller to do it though just using Automation Rules rather than Scenes.

 However, you can do the same thing by setting up a Routine in the Alexa App.  Sitting in my office I can say "Alexa, it's dark in here," and Alexa tells the P2 to turn on several X10 lamp and appliance modules and also tells the Lutron bridge to turn on the recessed lighting.  Let me know if you need any help setting it up.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.