Looking for a complete house/unit code list?

[mike]

In debugging stuff, a complete A1 thru P16 code list would be a nice thing to have;  For instance, in HG, there is a module that shows incoming X10 raw commands.  In debugging, I would like to be able to just look at a chart/list and find 20 70 8F 48 B7 means B7 ON, or 20 70 8F 68 97 means B7 OFF.

I once had this list;  it is probably here somewhere, but I can't find it.

If anyone has  the list and can easily to send me a copy I would be very grateful!  Thanks.

[Brian H]

Dave Houston has a link on his web site.

http://wanderingsamurai.net/electronics/cm11a-x10-protocol-document

It is for the CM11A but has the X10 values in it.

Dave also has some very good information on some of the other protocols. Like X10 PLC, RF and IR are a few.
https://www.laser.com/dhouston/

I have not seen a chart with HEX information. The ones I mentioned have the X10 information in Binary form.

[mike]

Thanks Brian.  I have a couple other variations on this also, but I just don't want to spend a couple hours trying to decode it so I understand it enough to make binary, let alone hex, code for example RF send C4 ON.  I know I have seen compiled list that just shows it for all house & unit codes.