Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: 20Amp microwave filter  (Read 3526 times)

smatofu

  • Full Member
  • ***
  • Helpful Post Rating: 3
  • Posts: 53
20Amp microwave filter
« on: October 03, 2021, 08:59:13 AM »
Hi Guys,

what filter would you use for a 20 amp microwave?

Thanks
S.
Logged

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 160
  • Posts: 1458
Re: 20Amp microwave filter
« Reply #1 on: October 03, 2021, 01:34:19 PM »
The only one I know of with that rating is the X10 XPF 20A.
https://www.x10.com/collections/x10-filters-and-repeaters/products/xpf   
Maybe Jeff has some other ideas - maybe his ANR would do the job. Is the problem only when in use or all the time?
Logged

smatofu

  • Full Member
  • ***
  • Helpful Post Rating: 3
  • Posts: 53
Re: 20Amp microwave filter
« Reply #2 on: October 03, 2021, 03:58:58 PM »
Quote from: brobin on October 03, 2021, 01:34:19 PM
The only one I know of with that rating is the X10 XPF 20A.
https://www.x10.com/collections/x10-filters-and-repeaters/products/xpf   
Maybe Jeff has some other ideas - maybe his ANR would do the job. Is the problem only when in use or all the time?

Thank you Brobin,

I was thinking about XPF. The problem is that I will have to add a plug and connector: plug to connect the filter to the wall and then connector to plug in the microwave.

Alternatively I will open the outlet box, do wiring in the box, and screw the filter to the wall next to the electric outlet.  Either way, it will look messy.





 
Logged

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 160
  • Posts: 1458
Re: 20Amp microwave filter
« Reply #3 on: October 03, 2021, 04:20:09 PM »
If the microwave is on a dedicated circuit you could put the XPF in the electrical panel.
Logged

smatofu

  • Full Member
  • ***
  • Helpful Post Rating: 3
  • Posts: 53
Re: 20Amp microwave filter
« Reply #4 on: October 03, 2021, 05:07:05 PM »
Quote from: brobin on October 03, 2021, 04:20:09 PM
If the microwave is on a dedicated circuit you could put the XPF in the electrical panel.

Yes, this is what I may do. I will have to check if filter in the electric panel does not weaken X10 signal. 

X10 installation and troubleshooting is "rocket science"!!!  -:)
Logged

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 160
  • Posts: 1458
Re: 20Amp microwave filter
« Reply #5 on: October 04, 2021, 12:32:17 AM »
Does the microwave cause a problem when not in use?
Logged

smatofu

  • Full Member
  • ***
  • Helpful Post Rating: 3
  • Posts: 53
Re: 20Amp microwave filter
« Reply #6 on: October 04, 2021, 09:10:41 AM »
Quote from: brobin on October 04, 2021, 12:32:17 AM
Does the microwave cause a problem when not in use?

Yes, it causes problems even when idle. I have a 3,000sf house with multiple computers, laptops, chargers, LED bulbs etc... It looks like all interferences and attenuations add up. Maybe the microwave is the straw that breaks camel's back.
Logged

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 160
  • Posts: 1458
Re: 20Amp microwave filter
« Reply #7 on: October 04, 2021, 09:26:38 AM »
Assuming it's a dedicated circuit for the microwave and flipping the breaker solves the noise problem, the XPF is really your only option.  I don't think the XPF installed in the panel would be a problem as I've done something similar in the past with success.  You can get a brand new one on ebay right now for $22 delivered. 
https://www.ebay.com/itm/184819985300?hash=item2b08212b94:g:OFwAAOSw-7BglFhX
Logged

smatofu

  • Full Member
  • ***
  • Helpful Post Rating: 3
  • Posts: 53
Re: 20Amp microwave filter
« Reply #8 on: October 04, 2021, 11:06:08 AM »
Quote from: brobin on October 04, 2021, 09:26:38 AM
Assuming it's a dedicated circuit for the microwave and flipping the breaker solves the noise problem, the XPF is really your only option.  I don't think the XPF installed in the panel would be a problem as I've done something similar in the past with success.  You can get a brand new one on ebay right now for $22 delivered. 
https://www.ebay.com/itm/184819985300?hash=item2b08212b94:g:OFwAAOSw-7BglFhX

I ordered that filter yesterday!  :) 
Logged

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 160
  • Posts: 1458
Re: 20Amp microwave filter
« Reply #9 on: October 04, 2021, 11:28:42 AM »
Great! Let us know how it works out.
Logged

Moose

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 219
Re: 20Amp microwave filter
« Reply #10 on: October 04, 2021, 11:37:37 AM »
This was my solution to your issue. I have made 3 of these. My latest was for a Roomba vacuum that was really noisy. Notice that there is a ground wire running between connectors for 3 wire plugs.
« Last Edit: October 04, 2021, 11:39:11 AM by Moose »
Logged

smatofu

  • Full Member
  • ***
  • Helpful Post Rating: 3
  • Posts: 53
Re: 20Amp microwave filter
« Reply #11 on: October 04, 2021, 12:07:53 PM »
Quote from: Moose on October 04, 2021, 11:37:37 AM
This was my solution to your issue. I have made 3 of these. My latest was for a Roomba vacuum that was really noisy. Notice that there is a ground wire running between connectors for 3 wire plugs.

Looks clean! Thank you for sharing!
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.