Looking for a backup Stargate

[trkeenan]

Does anyone out there have a Stargate or know where I could find one?
Looking for a backup

[brobin]

I don't have an SG-1 to sell but I do have an HRRBI if you can use that.

[trkeenan]

Thanks for the offer, however I need the input/output capabilities.

Seems like someone out there would have a used Stargate or Homebase unit.

Tim

[brobin]

They do pop up on ebay from time to time. You can set up a 'saved search' on ebay and if one gets listed you'll be the first to know.

[trkeenan]

Good tip
Thanks very much

[Ezflyr]

Hi,

I have acquired several 'spare' Stargate controllers over the past couple of years, and I'd be willing to part with one. I have the DTMF/Telephone boards, and the WebX boards, so let me know what you are looking for!

John

[brobin]

PM'd you about a WebX board.

[Delmar7]

I have SG-1 with telephone board and Webex, 2 Xpanders, and Infred Xpander available.

[wberthold]

I have a JDS Timecommander unit that appears to have a bad comm interface - hooking up serial cable to WinEVM (Event Manager) shows no connection. I have a 2nd Timecommander that works using same interface (Cable-WinEVM).  Is there anyone who repairs Timecommanders? Or has the serial interface chipset(s)?

[brobin]

I don't have a TimeCommander to look at but I believe it uses the the same MAXIM MAX232CPE chip as the SG-1. If you can take a pic of the board I'll see if it matches. I've replaced several in the SG-1 over the years.  The chip itself is inexpensive.

Does the TimeCommander still talk to the TW523?

[GarageHawk]

I have the following JDS equipment  that I would be willing to sell.

1ea. SG-1 Controller w/ telephone board
1ea. I/O Expander
1ea. Infrared Expander

We can also repair most JDS HomeRunner X10/Insteon controllers.

I would like to obtain the latest HomeRunner Firmware download.

Please reply to contact me.

Best regards,
Bill

[brobin]

I have HomeRunner 2.18 if that's helpful. Happy to share it if you need it.

[GarageHawk]

Hi,

Thanks for your response. 

I'm looking for the most recent Firmware load.  I think it was HomeRunner RBI, v1.19, 09/04/2014 02:01:05 PM.

I could be wrong, but I think 2.18 was the last version of the application software.  Can any one confirm?

Bill

[brobin]

I have uploaded HRRBI v1.22 from July 2017 to FileMail where it can be downloaded until 11/11/24. After that I can do it again as needed or email to anyone requesting it. I have some older versions too.

Here's the download link:
https://www.filemail.com/d/ixomytlucllfmrh

[GarageHawk]

Got it.  Thank you very much.  I wasn't aware there was a firmware version beyond v1.19.  Are you currently running v1.22?  Do you happen to know what the 1.22 version did?

Is there a HomeRunner RBI app version newer than v2.18c May 14,2016?

Best regards,

Bill